Is SAVIOR Auto Pump Controller suitable for submersible pump?

Yes, it can be installed for any type of pump either it is submersible, mono block or any other type.

Is SAVIOR Auto Pump Controller applicable for 1&3 phase motor?

It is applicable for single phase and 3 phase motor load.

How many models of SAVIOR Auto Pump Controller to be made available?

Company has developed 3 new models: SA701, SA702, SA706.

How is it Possible?

Model SA 701: There are two sensors which are fixed inside overhead tank, one is for lower level and other is for upper level (just below the over flow pipe). When the water detach from the lower sensor, the pump will start and when the water touch the upper level sensor the pump will stop automatically. There is another sensor which is fixed inside underground tank just above the suction valve. A common sensor is fixed both the tank.

Model SA 702: There are two sensors which are fixed inside overhead tank, one is for lower level and other is for upper level (just below the over flow pipe). When the water detach from the lower sensor, the pump will start and when the water touch the upper level sensor the pump will stop automatically. There are two sensors which are fixed inside underground tank, one is for lower level and other is for upper level. When the water touch the upper level sensor the pump will start automatically (if required) and when the water detach from the lower sensor, the pump will stop automatically. A common sensor is fixed both the tank.

Model SA 706: There is a sensor which is fixed inside overhead tank (just below the over flow pipe). When the water touch the sensor the pump will stop automatically. There is another sensor which is fixed inside underground tank.

Is SAVIOR Auto Pump Controller operates the pump, while the underground tank is empty?

The Electricity is not stable. When electricity flows the voltage can rise and fall all the time. The rises in voltage are known as 'spikes' and they cannot be used by your appliances at all. All these spikes do is waste your electricity. These power spikes also convert electrical energy into heat energy which leaks power from your circuit.  Thus a lot of electrical energy gets wasted.
The Savior power saver stores the electricity inside of it using a system of capacitors and they release it in a smoother way to normal without the spikes. The systems also automatically remove carbon from the circuit which also encourages a smoother electrical flow. This means that you will have less power spikes. More of the electricity flowing around your circuit can be used to power your appliances than before. Thus saving a lot of electricity is saved from getting wasted or leaked from spikes, which finally reduces your electrical bills.

The Power Saver reduces the amount of power drawn from the utility by storing in its capacitors otherwise lost electricity caused by the inductive motors in your home. Some examples of inductive motors are air conditioning units, refrigerators, freezers, washers, dryers, pumps, vacuum cleaners, fans etc. The technology applied by the SAVIOR Electricity Saver Unit supplies that stored electricity back to your inductive loads, thus causing you to decrease your demand from the utility. If you decrease your demand from the utility, your meter slows down, and you can pay for it, store it, and reuse it again. This whole process is called power factor optimization.

Power factor is the percentage of electricity that's delivered to your house and used effectively, compared to what is wasted. for example, a 1.0 power factor means that all the electricity that's being delivered to your home is being used effectively for its purpose. However, most homes in India today have avg. 0.75 power factor or less. This means that 75% of the electricity that is coming through your meter at your home or business is being used effectively; the other 25% is being wasted by your inductive load. With a low power factor, the utility has to deliver more electricity to do the same work. However, the Power-Saver unit increases that power factor in most cases up to 0.95 or even more, thus increasing the effective use of your electricity and lowering your total power usage.

To activate the Savior LPG Detector connects it to 230V AC/12V DC and switch on the activation switch. If there is leakage of LPG on Save Zone/ Danger- I Zone Savior LPG Detector reaches a set operating point it sends a signal to programmed microchip, then microchip sends a signal to the Audio Alarm 70 dB with Yellow LED indication and as prevention Automatic Exhaust Fan will ON by sealed electromagnetic switch.

If there is leakage of LPG on Danger Zone/Danger-II Zone Savior LPG Detector reaches a set operating point it sends a signal to programmed microchip, then microchip sends a signal to the Audio High dB Hooter Alarm with Visual Red LED indicationThe alarm sounds until the situation becomes normal/ by switch off the activation switch.

Using Phone-speaker directly to Ear and Head:
Radiation penetrates such as the several types of headaches, vision and hearing difficulties, increased ear and facial temperatures, nausea, dizziness, tingling sensations on the skin, and numbness or irritation to the face , neck and brain. Heating effect in the fluid of internal ear, Confusion and loss of memory. Premature Cataract- Cornea of eye lacks blood supply and heat cannot be disposed. The blood vessels in the brain and the surrounding tissue from the BBB that can easily dispose heat. Leakage of Albumin from blood into the brain due to increased permeability of BBB

Using Headset:
The radiation emitted by the wire between the phone and headset, and emissions from the earpiece directly into the ear canal. Wireless headsets use a technology that replaces the headset wire with an additional transmitter and receiver and may prove to represent a greater health risk than wireless phones.

Using Wireless:
The health risks have increased as a result of new technologies such as multi-function pagers, higher frequency mobile devices including Bluetooth,3G, 4G, 5G and Wi-Fi products operating at 2.4 GHz. and higher frequencies, long range cordless phones operating at frequencies up to and above 5.8 GHz., and personal information managers integrated with mobile phones.

Putting the Mobile Phones near Heart:
Radiation penetrates such as the Heat Attack and high Blood Pressure.

Putting the Mobile Phones near waist:
Radiation penetrates areas such as the liver, kidneys, waist, groin , hip and reproductive organs.

Effect on Children:
Children have the potential to be at greater risk than adults for developing brain cancer from cell phones Their heads are smaller than those of adults and therefore have a greater proportional exposure to the field of radiofrequency radiation that is emitted by cell phones.

Indirect Effect to Others:
A person within 3 inches (7 centimeters) from you is exposed to the same amount of radiation emitted by your wireless product that you are. Although the amount of exposure significantly declines over distance and a 12 inch (30.48 centimeter) distance is considered safe by some scientists, it is impossible to avoid radiation in the air that surrounds all of us or reflected off surfaces within close proximity to wireless products. 

Our Anti Radiation technology will not eliminate tissue heating and any inconveniences associated with your phone. However, some of the "heating" sensation may be associated with the induction of stress proteins, a biological effect not necessarily associated with heating, and thus HiTech Mobile Radiation & Heat Protector may help to reduce that symptom.